Modules Reference: Estimator

ekf2

Source: modules/ekf2

Description

Attitude and position estimator using an Extended Kalman Filter. It is used for Multirotors and Fixed-Wing.

The documentation can be found on the ECL/EKF Overview & Tuning page.

ekf2 can be started in replay mode (-r): in this mode it does not access the system time, but only uses the timestamps from the sensor topics.

Usage

ekf2 <command> [arguments...]
 Commands:
   start
     [-r]        Enable replay mode

   stop

   status        print status info

local_position_estimator

Source: modules/local_position_estimator

Description

Attitude and position estimator using an Extended Kalman Filter.

Usage

local_position_estimator <command> [arguments...]
 Commands:
   start

   stop

   status        print status info

wind_estimator

Source: modules/wind_estimator

Description

This module runs a combined wind and airspeed scale factor estimator. If provided the vehicle NED speed and attitude it can estimate the horizontal wind components based on a zero sideslip assumption. This makes the estimator only suitable for fixed wing vehicles. If provided an airspeed measurement this module also estimates an airspeed scale factor based on the following model: measured_airspeed = scale_factor * real_airspeed.

Usage

wind_estimator <command> [arguments...]
 Commands:
   start

   stop

   status        print status info