CUAV HV PM (High-Voltage Power Module)

The CUAV^® HV_PM power module is a "high voltage" power module independently developed by CUAV.

The HV_PM is included in the CUAV V5+/V5 nano kit, but is also be sold separately. There are different cables depending on the flight controller (Pixhack v3, V5+/V5 nano, Pixhawk). It can be used with other flight controllers, but you may need to modify the cable pin.

Specifications

• Higher voltage input: 10V-60V (3s~14s battery)
• Accurate battery monitor:
  • Voltage detection accuracy: +-0.1v;
  • Current detection accuracy: +-0.2A
• BEC (5v) max current: 5A
• Max (detection) current: 60A
• Max output current (ESC/MOTOR PORT): 60A

Purchase

CUAV aliexpress store

Pinouts

Enable HV PM

Battery and Power Module Setup describes how to configure the battery and power module.

The key configuration settings for HV_PM are:

• Voltage divider: 18
• Amps per volt: 24 A/V